fbpx

Pressure Washer Maintenance Tips 

If you plan on having your pressure washer around for the long run and use it as much as possible, then you will need to follow proper maintenance on it regularly. In order to keep your best industrial surface cleaner in Kansas City in good condition, follow these pressure washer maintenance tips.  

 Before Use 

  1. Check for any wear and tear on the “o rings” that are found on the end of the hose. Damage to them can cause leakage and possible injury.
  2. Clean any dirty water inlet screens.
  3. Inspect all parts, including the spray gun, spray tip, detergent siphoning tube, and wand extension tomake sure they are not clogged. 
  4. Check the hosefor any damage such as cuts, leaks, and bulges. 
  5. Make sure all connections are fastened and secure and that the spray gun trigger locks.

After Use 

  1. After using the best industrial pressure washer in Kansas City, you will need to rinse the detergent from it by running water through the system for a couple of minutes.
  2. Turn off the best industrial cleaning equipment in Kansas Cityto relieve any pressure in the machine and run the water until it stops flowing out of the spray gun. 
  3. Let the pressure washer cool down and then disconnect the parts from it.
  4. Ensure all water is removed from the pump and clean off any debris.
  5. Store your equipment or thebest pressure washer rental in Kansas City somewhere out of the sun, rain, or snow. In addition, machines freeze up if left in a cold space, like a garage.
     

As you can see, maintenance on the best industrial pressure washer in Kansas City is fairly simple and requires only a few steps to ensure it’s in quality condition for as long as possible. To learn more about the best industrial cleaning detergents in Kansas City, please contact us to help you choose the best one for your needs.